Gen2 Polymer 80% Lower Receiver – AR-15
Polymer Lower Receiver Key Design Features:
Thickened design in Key areas, including:
Magazine well thickness and internal bevel
Rear Take-Down Pin re-design to increase material and fortify part in critical area.
Brass Inserts at the Pistol Grips and Buffer Tube Tower
Increased thickness at the Buffer Tube Tower
Note: In the AR-15 specifications / design the wall between the rear take-down pin and FCP (Opening for the Upper Rear Take-Down Boss) is thin – We recommend a push button quick take-down pin.
Jig System – SOLD SEPARATELY
Two Side plates which both indicate on the part in multiple locations and screw together.
Top Plate press fit into the side plates which allows for the Rough Pass, leaving 1/32” in width and depth for finish pass.
Drill Bits required to complete but NOT Included – Will be SOLD SEPARATELY:
7/16” End Mill with Stop Collar (FCP)
5/16” Drill Bit (Trigger Pin Hole)
3/8” Drill Bit ( Safety Selector Hole)
Watch The Genesis Product Intro Here
Watch a customer machining / instructional video Here
DEALERS: Contact us by email: email@example.com or by phone: 1-925-465-1505, to discuss dealer pricing on quantity orders.
Watch The JIG INSTRUCTIONS HERE